MCAP050-40S MegaFlow Filter Cartridges
Pastikan anda mendapatkan barang asli dan price harga terbaik
MCAP050-40S
DESCRIPTION
|
ATTRIBUTE VALUE
|
PRODUCT TYPE
|
FILTER CARTRIDGE
|
CONSTRUCTION
|
PLEATED DEPTH
|
FILTER MEDIA
|
POLYPROPYLENE
|
FILTER RATING
|
5 MICRON
|
DIMENSIONS
|
6" NOMINAL OD, 40" LONG
|
END CAP CONFIGURATION
|
LARGE ID INTERNAL O-RING/FLAT CAP WITH HANDLE
|
SEAL MATERIAL
|
SILICONE
|
END CAP MATERIAL
|
GLASS FILLED POLYPROPYLENE
|
CORE MATERIAL
|
POLYPROPYLENE
|
SUPPORT/DRAINAGE
|
POLYPROPYLENE
|
TYPICAL FLOW RATE
|
12.8GPM/PSID 175 MAX
|
TRADE/BRAND NAME
|
FULFLO MEGABOND PLUS
|
High Flow Capacity Pleated Filter Cartridges
Parker’s Fulflo MegaFlow filter cartridges provide a cost effective alternative to wound and other 2 1/2 inch OD style filter cartridges in high flow applications such as reverse osmosis pre-filtration and similar applications nominal efficiency is sufficient. Each MegaFlow cartridge can handle flow rates up to 175 gpm (662 lpm), significantly reducing the number of cartridges d and the housing size. Each 6 inch (152 mm) diameter MegaFlow cartridge has flow capacity equal to 8 standard 2 1/2 inch OD X 40 inch long filter cartridges. Positive O-ring seals and a built in handle make cartridge installation reliable, fast and easy.
MegaFlow cartridges are available in either pleated polypropylene or cellulose media with nominal ratings of 0.5, 1, 5 and 10 micron.
Benefits
· High flow capacity means fewer cartridges and reduces labor costs to change
· High flow capacity allows smaller housings and less capital expenditure
· Built in handle makes change fast, easy and safe
· O-ring seal assures filtration integrity
· Choice of polypropylene or cellulose media allows use in both aqueous and non-aqueous fluid applications
· Thermally bonded polypropylene and phenolic resin bonded cellulose filter media prevent particle bleed through
· and unloading that commonly occurs with wound cartridges
· High surface area pleated design provides lower pressure drop and longer service life than other cartridges
· All materials of construction in polypropylene cartridges comply with FDA regulations per CFR Title 21
· Horizontal and vertical housings are available for flow rates up to 3,325 gpm (12,586 LPM)
Applications
· Potable Water
· Waste Water
· Reverse Osmosis Pre-Filtration
· Lubricating Oil
· Coolants
Parker Fulflo MegaFlow Filter Cartridges
Specifications
· Materials of Construction:
· Media: Polypropylene microfiber (P Code); Cellulose with phenolic binder (C Code)
· Support Layers: Polypropylene (P Code); None (C Code)
· End caps: Glass Filled Polypropylene
· O-Rings: Buna-N, EPR, Silicone, Fluoroelastomer
Recommended Operating Conditions:
· Change Out Differential Pressure: 35 psid (2.4 bar)
· Maximum Flow Rate: 175 gpm (662 lpm)
· Maximum Temperature: 200°F (93°C)
· Maximum Differential Pressure: 150 psid (10 bar)
Nominal Filtration Ratings:
· (90%) 0.5, 1, 5 and 10 μm
Dimensions:
· 6 in (152 mm) OD, 3.5 in (89 mm) ID,
· 40 in (1016 mm) long
Surface Area:
· 55-60 ft2 (5.1-5.6m2)
PT.PROFILTER INDONESIA Quick Response + 6281385066789 Email : sales@profilterindonesia.com
MCAP050-40S MegaFlow Filter Cartridges