PT PROFILTER INDONESIA Distributor Cartridge Filter Bag Housing RO Membrane UV System

Suez GE AG4040FM RO Membrane

Semua Produk GE Osmonics Filter saat ini sudah berubah nama , untuk memperjelas silahkan anda menghubungi kantor kami dan pastikan anda membeli dengan produk asli dari PFI Filtraion Watermaker

GE A-Series thin-film reverse osmosis membranes elements are characterized by high flux and high sodium chloride rejection. AG Standard Brackish Water Elements are selected when high rejection and operating pressures are as low as 200 psi (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry.

Specifications:

Length: 40"

Diameter: 4"

Weight: 8 lbs

Active Membrane: 85 ft²

Membrane Type: Thin Film Composite

Outer Shell: Fiberglass-wrapped

Operating Pressure: 200 PSI

Maximum Pressure: 600 PSI

Permeate Flow Rate: 2200 GPD

Nominal Salt Rejection: 99.5%

Application Data:

Maximum Operating Temperature: 122°F (50°C)

Chlorine Tolerance: > 1000 PPM

pH Range, Continuous Operation: 4-11

pH Range, Short Term Cleaning (30min): 2-11.5

Maximum Feed Water Turbidity (NTU): < 1

Maximum Feed Water Silt Density Index (SDI): < 5

Test Conditions:

2,000 ppm NaCl solution

77°F (25°C) Operating Temperature

15% Permeate Recovery

7.5 pH Range

Untuk permintaan penawaran silahkan hubungi

PT PROFILTER INDONESIA

Ruko Blok G/54 – Commpark – Kotawisata – Cibubur 

Mobile : 081385066789 

Email : sales@profilterindonesia.com