PT PROFILTER INDONESIA Distributor Cartridge Filter Bag Housing RO Membrane UV System

FilmTec BW30XFR-400/34 RO Membrane

Membrane ini sangat ideal untuk manajer dan operator pabrik reverse osmosis yang berurusan dengan air dan air limbah yang menantang yang mencari kinerja tinggi yang konsisten, umur elemen yang panjang, peningkatan produktivitas, dan kualitas air yang lebih tinggi ditambah dengan ketahanan pengotoran yang sangat baik.

Spesifikasi Produk  :

400 kaki persegi area membran aktif

Spacer umpan 34 mil untuk ketahanan yang lebih baik terhadap partikulat dan pengotoran biologis

Kisaran pembersihan pH terluas (1-13) dan toleransi bahan kimia

Aliran permeasi 11.500GPD dan penolakan NaCl yang stabil sebesar 99,65% pada kondisi pengujian standar

Minimum 99,4% penolakan NaCl pada kondisi pengujian

Kondisi Tes: 2000PPM NaCl Tekanan umpan 225PSI 77 ° F Suhu pH 8 15% pemulihan

Starting in 2020, DuPont Water Solutions will offer our customers dry seawater reverse osmosis FilmTec™ elements.  An industry leader, we will be the first supplier to offer dry-tested SWRO elements. 

Dry elements do not have expiration date, making easier warehouse maintenance and inventory planning.

Dry elements do not need re-preservation while wet elements preservation solution needs to be checked after 12 months of storage and eventually d. This operation is very labor intensive and can lead to high costs.

More attractive warranties. The allowable storage time before mandatory start of the warranty has been extended by 6 months.

Dry elements are lighter (4 kg / 8 pounds less) and do not have a preservation solution, which involves an easier and safer loading and installation.

Due to the lower weight and the lower energy and water consumed during testing, dry elements are more environmentally friendly compared to wet elements, more specifically dry elements represent a 20% reduction in CO₂ emissions compared to wet elements.

FilmTec™ SW30HRLE-440i Elements offers sustainable lower lifecycle cost for medium- and high-salinity feedwaters with high stabilized salt rejection of 99.80% and high boron rejection. The highest guaranteed active area of 440 ft² (41 m²) permits lowest system cost by maximizing productivity and enables accurate and predicable system design. A 28-mil feed spacer provides low cleaning frequency and high cleaning efficiency. iLEC™ Interlocking End Caps reduce system operating costs and the risk of o-ring leaks that can cause poor water quality.

Untuk permintaan penawaran dan datasheet silahkan hubungi

PT PROFILTER INDONESIA

Ruko Blok G/54 – Gudang A/01

Jl.Canadian Broadway

Kawasan Pergudangan Commpark – Kotawisata – Cibubur 

Office : +6221 84937805 , 84937329

Mobile : 081385066789 

Email : sales@profilterindonesia.com