Aquafine CSL-8R UV Sterilizer PROFILTER INDONESIA

UV Sterilizer Aquafine CSL-8R, 80GPM

Untuk informasi stock barang dan harga silahkan hubungi kami 081385066789

Specification :

· Disinfection Model: CSL-8R

· Fresh Water Flow Range (GPM): 80

· RO/DI Flow Range (GPM): 100

· Pipe Size: 3" Flange

· Dimensions L x H X W: 41" x 20-3/4" x 11-1/2"

· Weight (lbs): 238

· Total Amps.: 4.2

· Total Watts: .516 KW

Standard Features:

· 99% Plus Bacterial Reduction

· Operating Pressure - 120 psig

· Chamber - 316 Stainless Steel

· Chamber - Passivated and Electropolished

· Integral Ballast Enclosure: 304 Stainless Steel

· LED UV Lamp Operating Display Panel

· Running Time Meter: 99,999 Hours. - Non resettable

· Socket Lok™

Mating flanges are NOT supplied with units.
Standard water temperature range 35 degrees F to 100 degrees F (2 degrees C to 38 degrees C)
Socket Lok™ is a registerd trademark of Aquafine Corporation.

Optional Features :

· S-254 UV Optical Sensor

· T-120 Temperature Safety Control

· High Water Temperature Models

· High Pressure Models (to 150 PSIG)

· Sanitary Fittings

· Lamp Out Alert

Optional Monitoring Package (See details below)

Optional Monitoring Package Details:

An integrated NIST traceable (optional) UV and temperature monitoring system will accurately monitor UV intensity and process water temperature of your existing UV treatment equipment from Aquafine. The new design improves reliability and performance accuracy in one state-of-the-art monitoring technology system. Component cost savings and improved liability protection will be some of the key benefits you will have with this state-of-the-art monitoring system. The detector employs a Gallium Nitride (GaN) photodiode and a semiconductor temperature sensor in a single package, along with its on-board electronics for remote and local operation features:

· Detector: UV and temperature sensors in a single housing

· Optional NIST-traceable UV sensor calibration with certificate upon request

· No optical filters, no degradation

· Withstands non-operating temperatures of 250°F

· 121°C for steam sterilization at a maximum pressure of 250psi (17.2 bar)

· Complete on-board electronics for UV and temperature

· Absolute and percent UV readout options

· Detector Cable: Water-resistant axial connector and cabling

· No diffuser, therefore no UV solarization

· Temperature sensor and controller does not calibration

· Detector can be used for UV Monitoring Station and Aqualogic 2000™ system.